Powder Metallurgy

Taking advantage of the robust search engine of the world suppliers directory, global Metallurgy Supplies importers, agents and distributors even Odm/Oem will easily find their opportunities to establish business relationship with reliable Metallurgy Supplies manufacturers, suppliers and exporters.

Metallurgy Supplies Products and Supplier, Manufacturer
Spinel
Sintered spinel. Specification: Mgo; 32% min ; Sio2; 0.5% max ; Cao; 0.5% max ; Fe2o3, 1% max ; Al2o3, 64% min ; Na2o+k2o 0.5%max ; Tio2, 0.1% max ; L.O.I, 0.3% max ; B.D, 3.25g/cm3 min ; Size, as required

Synthetic Slag
The covering powder used in tudish and furnace, to keep heat and protect against re-oxidizing of the molten steel. There are two types: acidic and basic, distinguished by chemical composition, to fulfill different requirements from the customers.

Aluminum Foil and Copper Wire
1) Aluminum foil: Al/PET, Al/PET glue, Al/PET/Al, Al/PET/Al glue. 2) Copper wire: Cu0.10mm/Cu0.12mm/Cu0.15mm/Cu4 x 0.10mm/Cu7 x 0.10mm/ Cu6 x 0.15mm. 3) CuSn wire: CuSn 0.10mm/0.12mm/0.15mm/3 x 0.10mm/4 x 0.10mm/4 x 0.12mm/ 6 x 0.10mm/7 x 0.10mm. 4) Aluminum wire: Al0.12mm/0.16mm/8 x 0.16mm/6 x 0.16mm. 5) Copper clad aluminum wire: CCA0.12mm/0.16mm/0.51mm/0.81mm/1.02mm. 6) Copper clad steel: CCS0.12mm/0. 15mm/ 0.16mm/ 7x0.16mm /0.20mm/ 0.26mm/ 0.51mm/ 0.63mm/ 0.65mm/ 1.02mm/ 1.63mm; 15%, 17%, 21%, 23 - 40%, 34% - 40% conductivity

Powder Metal
These products are widely used in powder metallurgy. Sintered structural parts are being used in 2/4 wheel vehicles, electric machines, agricultural products, office automation, electrical home appliance. Powder metallurgy can produce: 1. Complicated shapes in a low cost without machining through high productivity and material saving. 2. Accurate parts in uniform authority. 3. Nonstandard material for special purpose such as high anti-wear, anti-friction properties. 4. Self lubricating bearings utilizing small pores

Tinplate
Specifications: 1) Thickness: 0.15 - 0.4mm ; 2) Width: 150 - 580mm ; 3) Steel grades: SPCC ; 4) Hardness: T2.5 - T4 ; 5) Tin coated mass: 2.8g/2.8 ; 6) Coil weight: 2,000kg

Cold-Rolled Bright Steel Strips
1) Material: Q195, Q235, Q215,Q345, SPHC, SPCC. 2) Thickness: 0.3 - 2.5mm. 3) Thickness tolerance: +/-0.03mm. 4) Width: 30 - 400mm. 5) Width tolerance: +/-0.15mm. 6) Surface treatment: bright finish/dull or black finish

Hot Dip Galvanized Steel Coil
Hot dip galvanized steel sheet in coil (SGCC): 1) Quality standard: JIS G3302 SGCC, ASTM A653/CQ 2) Surface of product: regular spangle, minimum spangle, zero spangle, according to the clients' requests 3) Surface treatment: according to customer's request 4) Thickness: 0.22 - 2.0mm 5) Width: 900 - 1,250mm 6) Zinc coating mass: Z07 - Z18.

Iron Powder Used For Steel Metallurgy
Our products of iron powder is used to make core-line of Fe-Ca used in steel refine. (Fe 98.0% min.; C 0.06% max.; S 0.03% max.; P 0.03% max.)

Ferro Silico Calcium Cored Wire
We are one of the leading manufacturers of all kinds of alloy cored wire, the inner alloy or metal may be Ca, FeCa, CaSi, CaSiBa, CaAl, Mg, Al of 13mm diameter. Please send you detail requirement. We will send our best offer immediately. Hope, we can make a good and long relationship in our future cooperation. Specification: Ca 30 / -2% min; SI 56~58% min; c 1% max; al 1. 5% max; fe 4. 5% min Wire dia: 13 mm. Shape: Round. Powder fill rate (avg) : 220 / -20 grams per meter. Coil dimensions: Id 550 mm x od 1250 mm x h 1200 mm

Glass Etching Tape
Glass etching tape is use for etching sand blasting and acid work. It is available in various grades to serve different type of purpose. Grades available are C0, C1, C2, C3. It is also available with plotter paper. KOTADIA ENGINEERS'S Glass etching tape is made up of soft film so it is excellent for plotter cutting. It is available in clear, yellow and milky colors.

Powder Metal Products
We can supply the powder metal product such as rods tubes, balls gyro rotor and watch vibrators with tngsten heavy alloy, crucible, target and electrode with prue tngsten, plercing point bar, plate,sheet, strip bar and crucible with molybdenum, frerrous powder metal parts.

Carbon Spring Steel Wire
1) Types available: low carbon steel wire, mild steel wire, high carbon steel wire, galvanized steel wire, and non galvanized steel wire. 2) Diameter range: 0.2 - 13mm. 3) According to the standard of GB4357-89.

Filter Media
The pressing & filtering integrated oil press can control the pressing temperature. automatically. The machine use electricity to heat the press case and to make. it reach pressing temperature in short time, which improve the oil output rate. These integrated oil presses include press, vacuum filter, heating pipe and control cabinet.

Machined Aluminum Part
Specifications: 1) Material: aluminum, carbon steel, bronze. 2) Product weight: from 0.01kg to 10kg. 3) Main equipment: numerically controlled drill machines, numerical controlled milling machines, machining centers. 4) Main product using area: laser equipment, textile industry, food industry, automobile industry, ship fittings, diesel engine parts. 5) Surface treatment: plating with zinc, chrome and nickel, sand blasting, anodizing, sand blasting

Powder Metallurgy Parts
1) Materials: Iron series, copper series, copper steel alloy series, stainless steel series. 2) Applied software for specification drawings: Pro-E, Auto CAD 2000, UG. 3) Main equipment: a) Compacting equipment: maximum 750T ; b) Continuous sintering furnace, sizing machine, oil impregnation equipment. steam treatment equipment. 4) Applications: automobile engine parts, electric power tool parts

Steel Shot
Used for blast cleaning of casting, die-casting, forging, sand removal of casting, steel plate, H type steel, steel structure.

Calcium Aluminate
Calcium Aluminate For Refined Steel-making (Fused Type) Made from selecting material of high quality, melting the material in electric furnace, cooling, crashing into different sizes. This product can be divided into following types: CaO-Al2O3, CaO-SiO2-Al2O3-MgO and CaO-Al2O3-BaO-CaF2. We can also adjust products composition according to customers' requirement. Principle: Add deslag substance---Calcium Aluminate into the molten steel in LF furnace. Quantity is about 1. 5% of the molten steel in LF, namely, one ton molten steel needs Calcium Aluminate 10-15Kg. Density of molten steel is higher than Calcium Aluminate and the ratio is about 7. 8: 3. 5. In the deslag course, Argon was pumped in LF furnace from the bottom, it drives the deslag reagent to mix with the molten steel completely. Then the reagent adsorbs sulphur substance completely. Dregs will suspend on the surface of molten steel due to its low density and can also have warm-keeping function.

Galvanized Iron Wire
1) Diameter: 0.30mm - 3.0mm. 2) Finishes: EG, HDG, vinyl coated. 3) Tensile strength: 30 - 55kg/mm². 4) Coil specifications: 0.1kg - 2.5kg/coil. 5) Surface treatment: black, galvanized

Tinplate Sheets
Specifications: 1) Thickness: 0.16 - 0.4mm ; 2) Width: 180 - 580mm ; 3) Steel grades: SPCC ; 4) Hardness: T2.5 - T4 ; 5) Tin coating mass: 2.8 / 2.8 ; 6) Surface: as bright as a mirror

Deformed Steel Bars
1) Deformed bar grade: HRB335 / 400. 2) According to GB1499-98 standard. 3) Diameter: 10-32mm. 4) Length: 6m, 12m. 5) Special lengths and diameters available upon request

Round Strand Wire Rope
1) Range of products: zinc-plating stranded wire; steel cable for operation; zinc-plating and low-carbon steel for communications; steel core, carbon spring wire; phosphate carbon steel wire for optic fiber. 2) Construction: 1 x 7, 1 x 19

Powder Metallurgy
The explosive cladding and rolling technology of rare metal materials is one of the featured techniques for us. The institute systematically researches cladding of more than 50 sorts of metals including Ti, Cu, Al, Ni, Zr, Ta, stainless steel etc. material performances and engineering application techniques. Explosive cladding, explosive-rolling, rolling cladding etc are used to produce clad plates, sheets, tubes, rods, bars, joint fittings, dish-shaped plates, bimetals etc. which are widely applied in the fields of chemical engineering , metallurgy, medicine, light industry, ship-building, aerospace energy industry, nuclear industry. Rare metals (such as Ti, Cu, Al, Ni, Zr etc) clad materials are in the domestically leading level; the clad materials of common non-ferrous metals and stainless steel are in domestically advanced level.

Metal Knitting Net
Our company mainly produces various kinds of sieve nets and solution filters, such as nylon net, plastic net, metal knitting net, armor plate net, protective net, fiberglass net, pulling net, window curtain net, enclosure net

Hot Roiled Flat Steel Bar
1) Sizes: a) Thickness: 7mm - 32mm ; b) Width: 70mm - 160mm ; c) Length: 6m - 12m. 2) Standard: DIN 60Si2Mn, ASTM H92600, GB60Si2Mn, JIS SUP7. 3) Surface: oiled or black painted to prevent rust

Prebaked Carbon Anode
We product prebaked carbon anode, Specifications: 1) High density ; 2) B.D.: 1.58g/cm3 min. ; 3) R.D.: 2.08g/cm3 min. ; 4) Good mechanical intension ; 5) Compress strength: 45MPa .; 6) Flexural strength: 11-12MPa ; 7) Low elec. res.: 54 uOhm

Bio-degradable Heavy Duty Metal Forming Fluid
EASY-Draw is a heavy duty, multi-purpose, bio-based drawing, forming and blanking fluid. It is formulated with the best vegetable oils and selective extreme pressure additives for superior protection and performance. Applications: Recommended for stamping, drawing, forming, blanking and spinning Good for most metal types Applies by brushing, dipping, spraying or other method. Benefits: Superior lubricity and extreme pressure characteristic. Good adhesion to metal. Light coating eliminates excessive use. Contains no harmful chlorine, nitrides or phenols. Provides excellent rust and corrosion protection. Easy to remove with alkaline or solvent cleaners. Extends die life by creating a barrier between work-piece and die

Covering Agent / Flux / Calcium Silicate
Covering agent (flux/calcium silicate) is made from wollastonite and other materials. It is mainly used in steel and iron smelting to keep heat and protect against re-oxidizing of the molten steel and iron. We have several types and other chemical compositions can be adjusted. Specification: (SiO2 33-43) (CaO 10max. ) (Fe2O3 3.0max. ) (Al2O3% 15-25) (MgO -) (Moisture 0.8max. ). Physical: Melting Point:1300-1400 C. Size:2.0mm max.

Aluminium Fluoride
Dry method: 1) Bulk density: 1.5-1.6gr/cm³. 2) L.O.I: 0.5% max.. Anhydrous method: 1) Bulk density: 0.8-1.0gr/cm³. 2) L.O.I: 1.0% max.

Corundum (BFA, BFA-S, and WFA)
High toughness micro hardness is 1,800-2,300kg/mm². Abrasive articles made from it are suitable for grinding metals of high-tensile strength such as steel, annealed malleable iron and hard high-class refractory products. White aluminum oxide has even higher hardness compared with BFA; articles made of it are suited for grinding high carbon steel, high-speed steel work pieces and cutters. It can also be used in grinding and polishing materials, precision casting abrasives, spray and paint materials, chemical catalyst carriers, special ceramics, and high-class refractory products

Featured Metallurgy Supplies In Minerals, Metals Directory
Powder Metallurgy, Tinplate Sheet, Calcium Silicate, Corundum, Copper Wire, Metallurgy Supplies Manufacturer, Supplier, Exporter, Company from China and around the world.