| This page highlights pre-qualified Pneumatic Components (such
as Solenoid Valve, Pneumatic Valves, Exhaust Valve, Pneumatic
Cylinder, Air Filter, Pneumatic Fitting, etc.) manufacturers,
exporters and suppliers in China and around the world, which is
broadcasted online by the world Suppliers Directory. the sophisticated
B2B directory covering useful Pneumatic Components Business information
and Pneumatic Components trade services displayed to its full
extent by product description and manufacturer background introductions.
Taking advantage of the robust search engine of the world suppliers
directory, global Pneumatic Components importers, agents and
distributors even Odm/Oem will easily find their opportunities
to establish business relationship with reliable Pneumatic Components
manufacturers, suppliers and exporters.
Pneumatic Components Products and Supplier, Manufacturer
Fast Exhaust Valve
1) 1-way directional control element normally installed between
air cylinder and changing valve, making the air in cylinder
escape directly through this valve rather than changing valve.
2) Applied for valves where quick movement of air cylinder is
required
High Temperature Solenoid Valve
1) GDF series high temperature solenoid valve is widely applied
in such industries as scientific research, national defense,
metallurgy, mechanism, chemical industry, light textile, power
plant, petroleum, boat, and food. 2) Every part is made of high-temperature-resisting
materials. 3) Can adjust automatically and remote control the
working medium in the pipe system such as water, gas and oil
with acid and alkali performance below 180°C.
Pneumatic Valves
4V: 5/2 or 5/3 solenoid valves. 4A: 5/2 or 5/3 pneumatic control
valves. 3V: 3/2 solenoid valves. 3A: 3/2 pneumatic control valves.
With ports 1/8" to 1/2". Namur type can be made. With
single coil or double coils. Working medium: filtered air. Working
pressure: 0.15-0.8MPa. Working temp.: 5-50c. Coil: class F.
Coil power: 5.5VA or 4.8W. Coil with flying leads or DIN connector
Diaphragm Solenoid Valve
Explanation: removing the coil before brazing the valve body
and protect valve body with wet cloth and the body temperature
should be under Installation: coil up-side, valve body upright.
Working condition: Orifice: Φ7mm. Power: AC 220V, AC 110V, DC
24V, DC 12V. Voltage range: 85%-110%. Frequency: 50/60Hz. Rating
power: 10W. Suitable medium: R22, R134a. Medium temperature:
-30º C~+130º C. Environmental temperature: -20º C~+50º C. Interior
leak: P=0. 5Mpa, Q≤10ml/min. Max. working pressure: 5.0Mpa.
Life: 100, 000 times. Temperature rise of coil: ≤80K
Actuator
QT actuator is used for control butterfly valves or balls. It
is very popular for its beautiful appearance, small size, lightweight
structure and good quality. The material of body is die casting
aluminum. The output torque range is from 40N.m to 2000N.m.
Stainless Steel Cylinder
1) Motion pattern: double actions. 2) Working medium: air. 3)
Operating voltage range: 0.1-0.9MPa. 4) Operating temperature
range: -5~70°C. 5) Operating speed range: 50-500mm/s. 6) Oil:
lubricated and not lubricated. 7) Joint pipe bore: M5 x 0.8,
G1/8
Electronic Drain Valve
Specifications (timer): 1) Interval time: 0.5 - 45min. 2) Discharging
time: 0.5-10s. 3) Manual test button: available. 4) Voltage:
24 - 240V, ±10%, 50 / 60Hz. 5) Safety grade: IP65, NEMA4. 6)
Indicator light: yellow, indicates valve open/close. Specifications
(solenoid valve): 1) Type: 2/2 direct-acting valve. 2) Inlet/outlet
connection: 1/2" or 1/4" internal screw. 3) Max. working
pressure: 16 Bar (for high pressure, 40/80/250/350/400 Bar available).
4) Ambient temperature: 2 / 55oC. 5) Medium temperature: 90oC.
6) Insulated grade: H (180oC). 7) Safety grade: IP65. 8) Voltage:
±10%
Filter
Air Filter: It is mainly used for cleaning and effectively eliminates
various impurities in the compressed air from compressors with
automatic discharge structure, higher safety. There are multiple
specifications for your choice. Technical Parameter: 1)Applicable
Medium: Air. 2)Filtration:5μm. 3)Max Pressure:1.0MPa. 4)Applicable
Temperature:0-60oC. 5)Gauge Port Size:G1/4.
Pneumatic Axial Valve
1. Size: 3/8" ~ 2" (DN10 ~ DN50). 2. Working medium:
Corrosive, inert gases and liquid media. Max. pressure: 10 bar.
Max. temperature: -10°C ~ +150°C. 3. Control medium: Inert gases
Permanent pressure: 3 bar ~ 8 bar. Max. temperature: 120°C.
4. Control type: single acting, double acting. 5. Material:
Body: CF8M. Seal: EPDM. 6. Connection type: BSP, NPT screwed.
7. Advantages: Perfect sealing, can work in vacuum 740mmHg (relative
vacuum) Small shape, large flux
Quick Exhaust Valve
Specifications: 1) Working medium: air. 2) Joint pipe bore:
G1/8" - G3/4". 3) Working- pressure range: 0 - 1.0MPa.
4) Operating temperature range: 0 - 60°C
Solenoid Valves
1) Adopts integral slot throttle structure. 2) Structure type:
guiding valve type. 3) Material: aluminum, stainless steel,
nitric rubber. 4) Temperature: 0 - 80oC. 5) Working pressure:
0 - 1MPa. 6) Voltage: DC 24V, AC 24V / 110V / 220V (50 / 60Hz).
7) Level of protection: IP54. 8) Valve hole is processed with
special high precision finishing technique. 9) Widely applied
to pneumatic systems
Gas Emergency Shut Off Solenoid Valve
1) Nominal diameter: 15 - 50mm (thread), 65 - 400mm (flange).
2) Medium: coal gas, natural gas, liquefied petroleum gas. 3)
Ambient temperature: -20 - 60°C. 4) Working pressure: 0 - 4
bars or 0 - 500m bar. 5) Sealing: NBR. 6) Valve body: casting
steel, or casting aluminum. 7) Protection class: IP65. 8) Optional
Explosion proof grade: ExmIIT4, ExdI/IIBT3/T4. 9) Response time:
less than 3s. 10) Normally open and pulse type, the coil haven't
electrify during working, does not consume electricity. 11)
During emergency, the coil have a split second of electricity,
the valve is closed and self-locked. With manual restoration
function
Pulse Jet Valve
electromagnetic pulse valves are the right-angle valves same
as series "Z", which are suitable for the installation
connection between the gas dome and the bag house blow tube.
There are fixed nuts at both ends which make it easy to install
and use.
Pneumatic Cylinder
Providing full range of pneumatic components, incorporating
air preparation, air cylinder (ISO 6431, ISO 6432) , mini cylinder,
aluminum cylinder, solenoid valves, mechanical valves, pneumatic
valves, air tube, fittings, etc.
Thin Type Cylinders
1) Directing installation type. 2) The compact design with a
short overall length makes the cylinder easy to install in confined
spaces. 3) Using the mounting hole through design, no extra
accessories are required for fixing. 4) Maintenance: the cylinders'
design is easy to be disassembled for reducing the maintenance
cost. 5) A choice of stroke length, and a variety of catalogue
options. 6) High-temperature type: high-temperature type cylinder
is optional; the special seals are suitable to be adopted under
the temperature of up to 150°C. 7) Magnetic: the magnetic cylinder
is option for using with switch sensors
Solenoid Valve
1) Body material: brass. 2) Operating type: normally closed.
3) Mode of action: 2/2-way, semi-direct lift type. 4) Sealing
material: PTEF or Viton; NBR is standard. 5) Coil grade: class
H, IP54 / IP65. 6) Suitable for applications with temperature
below 120°C. 7) Reliable action under consistent pressure. 8)
Connection pipe size: PT 1/2" - 2", flange 3/4"
- 2"
TC Linear Cylinder
Fluid: Filtered air with or without lubrication. Action: Double
Acting. Proof press:1.5MPa(15kgf/cm2). Max. press:1.0MPa(10kgf/cm2).
Min. press:0.05MPa(1kgf/c2). Cushion: Air Cushion. Amb. temp.:10-60°C.
Piston speed:50-500mm/s
USA Style Pneumatic Fitting
Tube:5/32'' * active thread 1/4''. Tube: 1/8'' * active thread
1/8''. Tube: 5/32" * active thread 1/8''. Tube:1/4'' *
active thread 1/8''. Tube:3/8'' * active thread 1/4''. Tube:
3/8'' * active thread 3/8''. Tube: 1/2'' * active thread 3/8''.
Tube: 1/4'' *active thread 3/8''. Tube: 3/8" * active thread
1/8''. Tube: 3/8'' * active thread 1/2''. Inch Tube & Metric
Tube are both available, and there are PT, NPT, BSP and NPTF
threads for your reference.
Pneumatic Products
The major products of the company are pneumatic components including
air source processing units, solenoid valves, air cylinders
and accessories. The products have complete specifications and
attractive appearance and are popular among clients.
Compact Guide Cylinder
Small volume, Compact. High side load resistance. Strong resistance
to torque force. High non-rock-over precision. Choose the sliding
bearing or ball guide bearing for the bearing of guide rod.
Easy for installation and use. The position of two-surface connecting
pipes is available for selection
Pneumatic Actuators
Reliability, high performance, long cycle life, large adjustment,
highest levels of corrosion protection, wide selection of model
with easy and economy. specifications: Direct mounting Namur
solenoid valve capability ; Internal porting eliminating external
tubing (when NAMUR mounted solenoid is used) ; Adjustable mechanical
travel stops ; Blow out proof pinion gear ; Optional Viton seal
kit ; Visual indication ; works equally well on lubricated or
non-lubricated air
Mechanical Valve
1) Working medium:40 micron filtered air. 2) Joint pipe bore:
G1/8"- G1/4". 3) Working-pressure range: 0 - 0.8MPa.
4) Operating temperature range: 0 - 60°C. 5) Position and way
number: two-position five-way, two-position three-way
Air Filter Combination
1)Ensured Pressure Resistance: 1.5MPa. 2)Highest Working Pressure:1.0MPa.
3)Ambient and Fluid Tempareture:5-60°C. 4)Filtering Precision:
25μm. 5)Recommended Oil Use: Turbine No.1 Oil SOVG32. 6)Container
Material: Polycarbonate. 7)Pressure Regulating Range:0.05-0.85MPa.
8)Valve Type: With Overflow. 9)Port Size: G1/4". 10)Pressure
Gauge Size: G1/8". 11) Weight: 0.74kg. 12) Material: a)
Body: aluminum die cast forming ; b) Container cup: PE
Pneumatic Butterfly Valve
1. Size: 2" ~ 6" (DN50 ~ DN150). 2. Working medium:
Corrosive, inert gases and liquid media. Max. pressure: 16 bar.
Max. temperature: -10°C ~ +130°C. 3. Control medium: Inert gases.
Permanent pressure: 3 bar ~ 8 bar. Max. temperature: 80°C. 4.
Control type: double acting. 5. Material: Disc: CF8M. Valve
body: QT400. Seal: EPDM. 6. Max. ambient temperature: 60°C.
7. Advantages: Low power loss, high efficiency: no cranks or
gearing, no backlash.
Solenoid Valves and Pneumatic Control Valves
1) Working pressure: 0.15 - 0.8MPa. 2) Operating temperature:
5 ~ 50°C. 3) Voltage range: ±10%. 4) Power consumption: AC4.5V
DC3W. 5) Insulation and protection class: F Class, IP65
Coupling, Regulator, Valve Pneumatic Components
1. Light weight, compact design. 2. Quick operation-1 / 4 turn
on-off control of fluids utilized in process and instrumentation
applications. 3. Choice of replaceable end connections Provides
added system versatility. 4. Sizes: 1 / 4" through 3 /
4", 6mm through 12mm. 5. 100% factory tested. Manufacture
and OEM of hardware and tool accessories, tube fittings, pipe
fittings, various pneumatic, hydraulic quick couplings, sus
304. 316 high / middle pressure fittings. Offer to sell tube
fittings, pipe fittings, various pneumatic.
Pneumatic Parts
1) Cylinder: mini cylinder, compact cylinder. 2) Stainless steel
cylinder, heavy duty cylinder. 3) Solenoid valve: 4V directional
valve, 2-way valve, 3-way valve, mechanical valve, angle valve.
4) Air filter: full metal air filter, SMC replacement air filter.
5) Fittings: pneumatic fittings, plastic fittings, brass fittings,
quick coupler
Dual Flow Valve (solenoid valve)
1) Modern structure, beautiful configuration and zero leakage
2) Double - flow - volume setup (big and small), high discharge
accuracy 3) Four connection modes available: flange, outer -
thread, flange - outer - thread and inner - thread 4) Anti -
explosion function for computerized dispensers. 5) Metric parameter:
20mm 6) Metric pressure: 0.35MPa 7) Flow rate: 0 - 60L/min 8)
Rated voltage: VAC 220V
Featured Pneumatic Components In Industrial Supplies Directory
Solenoid Valve, Pneumatic Valves, Exhaust Valve, Pneumatic Cylinder,
Air Filter, Pneumatic Fitting, Pneumatic Component Manufacturer,
Supplier, Exporter, Company from China and around the world.
|
