| This page highlights pre-qualified Hydraulic Pressure Tools
(such as Hydraulic Press, Hydraulic Fitting, Hydraulic Puller,
Hydraulic Jack, Hydraulic Cylinder, etc.) manufacturers, exporters
and suppliers in China and around the world, which is broadcasted
online by the world Suppliers Directory. the sophisticated B2B
directory covering useful Hydraulic Pressure Tools Business information
and Hydraulic Pressure Tools trade services displayed to its full
extent by product description and manufacturer background introductions.
Taking advantage of the robust search engine of the world suppliers
directory, global Hydraulic Pressure Tools importers, agents
and distributors even Odm/Oem will easily find their opportunities
to establish business relationship with reliable Hydraulic Pressure
Tools manufacturers, suppliers and exporters.
Hydraulic Pressure Tools Products and Supplier, Manufacturer
Hydraulic Hole Digger
1) The specifications of finished distributor, on-off case and
plate can be changed at any time. 2)) Can change the size of
tool simply, and will not destroy the surface at all after drilling
hole. 3) Hole diameters: Ø21.8, 27.6, 34.1, 42.7, 48.7, 60.5mm;
MS32 x 32
Hydraulic Jacks, Stands, Shop Press & Crane
Jack: Hydraulic bottle jack: 1.6-50MT. Hydraulic floor jack:
2.0-50MT. Aluminum hydraulic floor jack. Air hydraulic bottle
jack: 5, 12, 20MT Porta power jack: 4, 10MT. Farm jack: 20,
33, 48, 60". Transmission jack: 0.5, 1, 1.5MT. Long ram
jack: 3, 5, 8MT. Jack stand: 2, 3, 6MT. Pull back ram; 2, 5,
10MT. Motorcycle lift: 800, 1000, 1250, 1500lbs. Shop press:
10, 20, 30, 40, 50MT. Crane: 1, 2MT. Hydraulic pipe bender:
12, 16MT.
Lifting Bench
1) Drive: hydraulic pressure. 2) Location: photoelectricity.
3) Used to heap film and thick boards/sheets
Hydraulic Bottle Jack
Specifications: 1) Capacity: 10MT. 2) Min. Height: 205mm. 3)
Lifting Height: 125mm. 4) Adjustment Height: 80mm. 5) Max. Height:
410mm. 6) N.W.: 6.2kg. 7) Dimensions (cm): 30.5 x 29.5 x 24
Hydraulic Pliers
1. Hygh-tech from germany, novel design by wanding. 2. Fully
automatic restoration, took the place of safety fdevices and
saves the time of manpower. 3. Manual relief button, it can
be loosen and rapid restoration when working. 4. Emebeded oil
valves, easy to repair with less failure. 5. Plug-opened, light
and firm, feel free to circumrotate 360 degrees
Hydraulic Floor Jack
We can supply Air Jack, Hydraulic Bottle Jack, Farm Jack, Screw
Jack, Jack support, Shop Press, Shop crane, Long Ram Jack, Porta
Power Jack, Hydraulic Floor Jack, High Position Conveyer Series
from china.
Hydraulic Cylinders
Heavy duty welded construction. Bore sizes from 1.5" to
8". Stroke sizes 2" to 80". Chromed, ground &
polished piston rod. Skived tubing. Ductile iron piston. Thread-in
ductile gland. Urethane u-cup, metal encased wiper, Teflon cap
seal and wear ring. Cross tube end fittings with grease zerks
Hydraulic Curved Tube Machine
Features: 1) Max. working pressure: 59MPa. 2) Max. working loading:
196KN. 3) Max. working journey: 320mm. 4) Thickness: 2.75 -
4.5mm. 5) Angle of curue tube (rad): π/2≤a<π
Hydraulic Leveling System
The hydraulic leveling system for vehicles is a kind of hydraulic
equipment used to strut vehicle body, truck, tipper, van, car
or machine. It is capable of stabilizing vehicle body and reducing
load on tires and steel spring plate. Equipped with advanced
automatically operating module.
Hydraulic Puller
1) Ideal tool to replace the traditional machinery puller. 2)
Convenient operation, labor saving, freedom from ground and
locality, light weight and agile volume make it portative and
suitable for repairing in hardware, machinery and electric power
fields
Hydraulic Fitting
Hydraulic fittings ; Brass fittings ; Bite fittings ; Hydraulic
adaptors ; Hose fittings ; Hydraulic accessories ; Hydraulic
hose fittings ; Hydraulic brass fittings
Hydraulic Hand Pallet Trucks
1) Convenient three-position control lever in the handle provides
easy one-handed fingertip operation. 2) Neutral position frees
the handle of all hydraulic functions. 3) Handle returns to
the upright position when not being used. 4) Fork tips are tapered
and inclined to allow easy entry into pallets. 5) Smooth rolling
solid nylon load wheels have double sealed ball bearings for
maintenance free operation. 6) Unique welded-seam pressure pump
has overload and top-of-stroke bypass valves to protect from
misuse. 7) Grease fittings are conveniently located, allowing
easy lubrication. 8) Extra wide polyurethane rubber covered
steel steer wheels have lifetime-lubricated ball bearings. 9)
Solid steel lifting rods add extra strength. 10) Heavy gauge
steel frame is reinforced with cross-welded steel plates to
prevent forks from bending
Hydraulic Pusher Cylinder
Single Acting Hydraulic Cylinder. Dimension: (HxD) : 21, 5x160
cm. Weight: 30 KG. Lifting Capacity: 50 tonne. Diameter of Cylinder:
12 x 8 cm. Internal Diameter: 12 cm. External Diameter: 16 cm.
The Height of Piston: 10 cm. External Height of Cylinder: 21,
5 cm. External Height of Cylinder (working) : 31, 5 cm
Hydraulic Crimping Tool
1) Out put power: 60kN. 2) Press range: 16 - 300mm2. 3) Stroke:
17mm. 4) Length: 460mm. 5) Net weight (with battery): 3.3kg.
6) Case: iron case. 7) Mould: 16, 25, 35, 50, 70, 95 120, 150,
185, 240, 300mm2. 8) Automatic retraction when crimp is complete
Hydraulic Hammer
We manufacture and supply you high quality hydraulic hammer.
big power and great performance. low noise and vibration. precise
operation. fantastic efficiency at hard and sticky rock. Top
adaptor, Top direct, Side type, High quality hydraulic breaker.
impact energy ; 434 joule(320 ft-lbs). operating weight ; 75-97
kgs. number of blow ; 800~1230 bpm. chisel diameter ; dia.40
mm. applicable excavator ; 0.7~1.3 ton.
Pressure Cleanrer
Features: 1) Adjustable working-pressure. 2) Low flow. 3) Electricity-leak
protection. 4) Special spare parts. 5) Long life span. 6) Easy
to move. Specifications: 1) Deposited motive force: DM8032 signal
phase condenser generating. 2) Power: 1.3kW. 3) Electrical source:
220V / 50Hz / signal phase. 4) Max. voltage: 8MPa. 5) Working
voltage: 1 - 6MPa (can be regulated). 6) Theory flow: ≤9.83L/min.
7) Movement ways: carry, lift, push. 8) Accessories in carton:
a bottle of oil, wearing parts. 9) A high pressure hose (10m),
influent pipe (3m), spray gun, quick tie-in
C-Frame Hydraulic Press
Type: C frame type, made of prime plate tested material. Capacity:
20 tons to 150 tons. Cylinders: En-8 forged tested material.
Type of press: Down-stroke. Electric motor: Abb / crompton /
Siemens / electric control panel: Star delta electric operating
panel. All presses are supplied with hydraulic power pack unit
consisting d. C. Valve, non return valve, check valve, safety
valve, pressure gauge. With oil tank.
Pipe-Shrinkage Machine
1) PLG control, hydraulic pressure drive, and the electronic
and hydraulic pressure components are imported. 2) Mobile foot-pedestal
switch, which is featured with three functions, i.e. automatic
start, emergent stop and emergent stop and resume, with high
safety. 3) It allows multiple ways of processing, such as pipe-shrinkage,
pipe-expansion and pipe-blunt, as well as multiple shapes, such
as concave, protruding, long, flat, square, rubbings, inclined,
V-shape. 4) Simple to replace the mold, which facilitates flexible
production
Hydraulic Valves And Accessories
Flareless hydraulic fittings, needle and shut off valves, flow
control valves, non-return valves, pipe clamps, hydraulic flanges
& components, hydraulic hoses, ball valves, rotary joints,
quick release couplings
Aluminum Long Frame Jacks
1) Lightweight for easy portability. 2) Two pieces of oversized
knurled aluminum handles. 3) Reaches full lifting height with
just 6 pumps (double pump). 4) Swivel casters for easy mobility.
Large Size Hydraulic Breaker
Absolute powertech breaker for maximum productivity. Low noise
box style bracket. Absorb repercussion cushion damper using.
fasterer blows and absorb recoil energy. Tool bushing replaceable
easily. Low operating and maintenance cost with excellent durability.
Accumulator installed to absorbing pressure fluctuation and
increasing power. Auto lubricating system available (option,
from PB3300). Under water working available.
Hydraulic Hole Digger
Split type hydraulic piercing press consists of hand pump or
electric pump and working head, oil hose is connected by quick
coupler, the sealing is reliable and quick, there is no limit
in direction during operation. It is both specially used for
piercing on metal plates, such as angle bar, flat iron, copper
and aluminum bar, and particularly suitable for fieldwork in
electric power and construction industries.
Hydraulic Puller
1) Jaws drop-forged with high quality carbon steel. 2) Long
stroke, pulling the article only one time. 3) Unique design
for easy using. 4) Spring draw back or under loading
Tie Rod Hydraulic Cylinder
1) Double acting. 2) Bore size: 2.0" - 5.0". 3) Stroke:
4" - 36". 4) Pressure: 2,500PSI. 5) Ductile iron piston,
end mounting, gland and clevis. 6) Hard chrome plated quenching
rod. 7) High tensile strength tie rod. 8) Precision honing tube.
9) Seals are to US specifications
Hydraulic Jacks
1) Capacity: 3T and 4T. 2) Min. height: 158 - 300mm. 3) Lifting
height: 90 - 180mm. 4) Adjusting height: 60 - 80mm with two
stages. 5) With good performance
Hydraulic Shearing Machine
1) The machine employs hydraulically-driven swing beam, steel
plate welded structure, and accumulator-based pullback cylinder
with steady and reliable operation. 2) Indicator-based adjustment
of blade gap is convenient and fast. 3) The machine is equipped
with lighting alignment device, and uses stepless controls for
the stroke of up tool carrier. 4) The machine uses a protection
fence for safe operation. 5) Digital display device for size
of back gauge and shearing times available
Hydraulic Brake
Electro-hydraulic brakes can be extensively used for various
mechanisms deceleration and stop / braking of various lift,
belt transport, port handling, metallurgical and building machinery.
Mechanical Hydraulic Cylinder
1) Double acting cylinder. 2) Precision honing tube. 3) Heavy
duty welded construction. 4) Hard chrome plated quenching rod.
5) Ductile iron piston and gland. 6) Port type: NPT or SAE.
7) Bore size: 1.5" - 5.0". 8) Stroke: 4" - 48"
or more. 9) Pressure: 3,000PSI. 10) Seals are to US specifications.
11) Pin eye mounting both ends
Featured Hydraulic Pressure Tools In Industrial Supplies Directory
Hydraulic Press, Hydraulic Fitting, Hydraulic Puller, Hydraulic
Jack, Hydraulic Cylinder, Hydraulic Pressure Tools Manufacturer,
Supplier, Exporter, Company from China and around the world.
|
