Bearing Manufacturers

Auto Bearing
Ball Bearings
Angular Contact Ball Bearing
Deep Groove Ball Bearing
Thrust Ball Bearing
Bearing Accessories
High Precision Bearing
Needle Bearing
Pillow Block Bearing
Roller Bearings
Cylindrical Roller Bearing
Spherical Roller Bearing
Taper Roller Bearing
Sliding Bearing
Special-purpose Bearings
Spherical Plain Bearing

Bearings Products and Supplier, Manufacturer
Full Ceramic Bearings
1) Out and inner ring: zirconia. 2) Ball: zirconia. 3) Retainer: PTFE, nylon, PEEK or stainless steel. Full ceramic bearing is non-magnetic, non-conductive, wear and corrosion resistant. It runs smoothly without oil or grease, which means nearly no maintenance is required during working. It is especially suitable for low and high temperature usage. At present, full ceramic bearing has been applied in chemical, metallurgical, food, electronic and other industry.

Clutch Bearings
Pyc bearing is a specialized manufacturer of various clutch bearing.clutch bearing incorporate conventional clutch release bearings and resin sleeves. They also include a self-aligning mechanism that reduces noise and wear on the diaphragm spring. These bearings are lightweight, compact in design, and have improved dust- and water-resistance.

Thrust Ball Bearings
Thrust ball bearings can handle loads in the axial direction only. Bearing rings mounted on the shaft are called shaft washers, and those mounted in the housing are called housing washers. Both washers contain raceways for the balls. Thrust ball bearings are available as both single and bi-directional types. The bi-directional thrust bearing incorporates a third washer and an additional set of balls. This center washer is located in the axial direction by a shaft shoulder and sleeve.
Ceramic Bearings
1) Ceramic bearings have excellence performance as special electrical and magnetism resistance, wear and corrosion resistance, lubrication and maintenance free when working, high and low- temperature resistance etc. So they are suitable to be used in awful environment and special condition.
2) The rings and balls made of full ceramic material: ZrO2, SisN4 and Sic as a standar structure, the cage made of PTFE. 3) Series available: single-row deep groove ceramic ball bearings, self-aligning ceramic ball bearings, single direction thrust ceramic ball bearings and angular contact ceramic bearings. 4) Ceramic balls: all kinds of ceramic balls with the precision.

Automotive Bearings
Many kinds of automotive bearings available: such as wheel hub unit bearings, clutch bearings and multi-tough bearings.

Adapter & Withdrawal Sleeves
Adapter and withdrawal sleeves are devices used to mount and secure rolling element bearings with tapered bores onto cylindrical shaft seats. This enables the mounting or dismounting of rolling element bearings in a simple and effective way for a variety of applications.

Angular Contact Ball Bearing
Single-row angular contact ball bearings can sustain radial, axial and momentary loads. However, any axial load must be applied in one direction. Due to their design,angular contact bearings will experience some amount of axial loading from any radial load that is applied. For this reason, they are often used in pairs. We provide various combinations with pre-adjusted clearance to simplify assembly. Typical applications: speed reducers, automotive applications, construction equipment, pumps, printing presses, paper mill machines

Structure Steel Shelf for Various Application
Our structure steel shelf is used in various fields: 1. Supporting steel structure for kinds of automobile. 2. Outdoor construction project steel engineering, like bridge, road rail, railway station, exhibition square, residential house and commercial building etc. 3. Indoor supermarket cargo shelf for showing and transporting, stair rail,hollow section etc. 4. Furniture shelf for table, desk, bed, chair, stool etc.

Ball Bearing Units
These units consist of a double-sealed single row deep groove bearing, and cast iron(or other material) housing in various configurations.

Deep Groove Ball Bearings
1) High quality and low noise bearings 2) Quality standards: ABEC1, ABEC3, ABEC5, ABEC7 3) Extensively used in: Household appliances Automobiles Motorcycles Power tools Electrical motors Water pump Agricultural machines Engineering mine machines Textile machines

Spherical Roller Bearing
Used in agricultural machine such as combininb harvesting machine, air-blower, paper-machine, textile machine, woodworking machinery, overhead crane moving wheel and driving shaft, etc.

Sintered Part
Our sintered parts are widely used in applications like automobiles, auto bikes / auto cycles, gears, motors..

Self-Lubricating Bearings & Bushings
SF triple layer composite material consists of 3 bonded layers: steel back strip and sintered porous spherical bronze particles interlayer, which are impregnated and overlaid with a polymer material

Needle Roller Bearing
Bearing is a specialized manufacturer of various needle roller bearing.
needle roller bearing features: 1) Drawn cup needle roller bearing ; 2) Radial needle roller and cage assembly ; 3) Radial needle roller and cage assembly for connecting rod ; 4) Heavy duty needle roller bearing ; 5) Cam follower and track roller bearing ; 6) Thrust needle roller or cylindrical roller & cage assembly

Thrust Roller Bearings
Thrust roller bearings are designed specifically to manage thrust loads and enhance high-shock load resistance within industrial applications. These bearings yield high-speed performance, true rolling motion and application flexibility. Because thrust roller bearings can not support radial loads, ball thrust bearings must be used with radial bearings. Even slight misalignments can cause drastic load concentrations, so the thrust bearings must be kept square with the shaft or used with self-aligning seats. However, the ability of the self-aligning seat to follow shaft wobble or misalignments is still quite limited.

Angular Contact Ball Bearing
1) Our angular contact ball bearings include three big categories: single row angular contact ball bearings, three-point-contact and four-point-contact ball bearings and double row angular contact ball bearings. 2) Single row angular contact ball bearings accommodate radial loads, acting simultaneously with a relative great axial load in one direction. 3) For axial load accommodation in both directions, the bearings are arranged in pairs against each other. 4) They have series of 70xx, 72xx, 79xx and inch series. 5) Contact angle is classified as C(15°), AC(25°) . 6) Mounting ways have DF - Face to face. 7) Three-point-contact and four-point-contact ball bearings are also single row angular contact ball bearings, which require significantly less space in an axial direction than double row designs. 8) Double row angular contact ball bearings principally correspond to a matched pair of single row angular contact ball bearings

Thermoplastic Bearing Housings
TP-P/F/FL/PA/FB available in black, green and white color. Material : Thermoplastic Polymer. Made in china.

Steel Ball
Steel Ball features: 1) Carbon steel balls AISI1015. a) Size: 1.4mm to 30mm. b) Grade: G2000 to G40 as per AFBMA. 2) Chrome steel balls AISI52100. a) Size:1.4mm to 150mm. b) Grade: G2000 to G10 as per AFBMA. 3) Stainless steel balls. a) Material: AISI304, AISI430, AISI440C. b) Size: 1.2mm to 25.4mm. c) Grade: accordingly

Spherical Plain Bearings & Rod Ends
We manufacture a full range of spherical plain bearings, spherical thrust plain bearings and rod ends. Materials available: chrome steel, carbon steel, bronze, stainless steel, etc.

Needle Roller Bearing
Needle-cage assembly drawn cup roller bearings, light and mid-sized needle roller bearings, and thrust needle roller bearings are suitable for conditions requiring small space and high load capacity. They are widely used for gear driving systems, automobile and engineering machinery turning systems, as well as motorcycle motor connecting rods.

Cylindrical Roller Bearings
specialized manufacturer of various cylindrical roller bearing, cylindrical roller bearings have exceptionally low friction torque characteristics that make them suitable for high speed operation. cylindrical roller bearing include: Single row cylindrical roller bearings ; Double row cylindrical roller bearings ; Four row cylindrical roller bearings

Sliding Door Rollers
1) Used in window, sliding and vehicle 2) Outer coated nylon 3) Color: ivory, orange, silver 4) Exported to the U.S.A. and Europe

Linear Motion Bearings
1) high precision linear ball bushings. 2) Metric and imperial size available. 3) Shaft size from 10 to 90mm

Water Pump Bearing
Water pump bearings are primarily used in automotive water pumps, basically consisting of standard double row bearings.These bearings are available in two main types: 1) Ball-ball: with two rows of balls; WIB, BWF, WS, WK, 885000. 2) Ball-roller: with one row of balls, one row of rollers; WIR, WKH, 665000 series, etc.

Roller Bearings and Other Bearings
Including series: 1) Needle roller bearings ; 2) Tapered roller bearings ; 3) Linear motion bearings ; 4) Spherical plain bearings and rod ends ; 5) Water pump bearings

Metric Taper Roller Bearing
Place of Origin: China. 1) Bearing type: 30203, 30204, 30205, 30206, 30207, 30208, 30209, 320/28. 2) Quality: meet European standards

Spherical Plain Radical Bearing
1) Material: GCr15 grade steel with oxygen content less than 20ppm. 2) Hardness for rings and rollers: 59 - 63HRC. 3) Bearing dimensions and tolerance levels comply with the latest ISO standards

Featured Bearings In Industrial Supplies Directory
Bearing Products, Bearings Manufacturer, Bearings Supplier, Exporter, Company from China and around the world.

Auto Bearing Introduction: one of the two members of the class of rolling, or so-called antifriction, bearings (the other is the roller bearing). The function of a ball bearing is to connect two machine members that move relative to one another in such a manner that the frictional resistance to motion is minimal. To minimize friction, the contacting surfaces in a bearing may be separated by a film of oil or gas; these are sliding bearings (see oil seal). In ball bearings and roller bearings, the surfaces are separated by balls or rollers.

There are six common principles of operation: sliding bearings, usually called sleeve bearings", or "plain bearings"; rolling-element bearings such as ball and roller bearings; jewel bearings, in which the load is carried by rolling the axle slightly off-center; fluid bearings, in which the load is carried by a gas or liquid; magnetic bearings, in which the load is carried by a magnetic field; and flexure bearings, in which the motion is provided by a load element which bends. Rotary bearings are required for many applications, from heavy-duty use in vehicle axles and machine shafts, to precision clock parts. The simplest rotary bearing is the sleeve bearing, which is just a cylinder inserted between the wheel and its axle. This was followed by the roller bearing, in which the sleeve was replaced by a number of cylindrical rollers. Each roller behaves as an individual wheel.

This page highlights pre-qualified Auto Bearing manufacturers, exporters and suppliers in China and around the world, which is broadcasted online by the world Suppliers Directory. the sophisticated B2B directory covering useful Auto Bearing Business information and Auto Bearing trade services displayed to its full extent by product description and manufacturer background introductions. Taking advantage of the robust search engine of the world suppliers directory, global Auto Bearing importers, agents and distributors even Odm/Oem will easily find their opportunities to establish business relationship with reliable Auto Bearing manufacturers, suppliers and exporters.

Auto Bearing Products and manufacturer
Air-Conditioner Bearings
1) Sealed double row angular contact ball bearing ; 2) Mounted in the electromagnetic clutch of a compressor for air conditioner in the automobile ; 3) Compact and high-speed rotation ; 4) Heat resistance, water resistance and dust-proof ; 5) Over 13 types of products available.
Pulley
Various metal stampings,pulleys,drawn cup parts available.

Water Pump Bearing
1.Wheel hub bearing, including 2 nd & 3nd generation hub units-Double row roller wheel bearings ; 2.Clutch release bearings ; 3.Tensioner bearing
4.Deep Groove Ball Bearing for driving shaft center supports, like Series 88107, 88505-88512 etc ; 5.Bearing for auto air-conditioner ; 6.Water pump bearing ; 7.Auto Generator bearing, like B8, B10, B15, B17 series
8.Universal Joint

Engine Bearing For Paykan
we supply more reliable engine bearings, thrust washers with high quality.

Automobile Bearings
1) Production range: include standard needle roller bearings, thrust ball bearings, taper roller bearings, water pump bearings, tension pulleys, clutches, etc. ; 2) For standard bearings, just quote equivalent part number from Torrington, INA, SKF, FAG, etc when you send enquiries. ; 3) For non-standard bearings, please send us specification drawings or samples when you send enquiries.

Auto Bearing
We supply a variety of non-standard bearings from china.

Automotive Air-Conditioner Bearings
1) Small size ; 2) Light weight ; 3) Can be applied to automotive compressor clutches on the condition of high temperature and high speed ; 4) Available with or without seals ; 5) Good performance under hard working conditions

Auto Redirector Bearing
We produce and supply auto redirector bearings such as types of 6202v,128702a,128602,128802,918306,9168404, etc.

Ball Joints
1) The bearing stud is tapered and threaded, and fits into a tapered hole in the steering knuckle ; 2) A ball joint consists of a hardened-steel, bearing stud and socket enclosed in a steel housing ; 3) They are used on the front end of virtually every car and light truck

Hub Bearing
This high quality hub bearing series fits most vehicle makes and
models, and packing / branding can me done per customer's requests.

Tensioner and Idler Bearing
1) Corresponding type: VKM 24100 ; 2) Size: d 10.5 x Bi 31 x Di 59 x C 32.5mm (20T) ; 3) Grease: high temperature grease

Belt Tensioner Bearing
All parts are manufactured in accordance with after-market service
standard and to replace OEM applications.

Oilless Bushing
1) Load capacity: 140N/mm2 ; ) Friction coef (µ): 0.03 ~ 0.18 ; 3) Temperature limit: -195 ~ 280oC ; 4) PV limit (dry): 4.3N/mm2.m/s ; 5) Speed limit: 10m/s ; 6) PV limit (oil): 60N/ mm2.m/s.

Double Row Self Aligning Ball Bearings
Inner diameter: 10 ~ 1000mm. Type: 1200, 2200, 1300, 2300, 1200k, 2200k, 1300k, 2300k. series and variant structure as 2RS, +H200, +H300, +H2300.

Engine Bearing
1) More than 1000 kinds of specification: main bearing, con rod
bearing, bushing of copper-lead alloy, aluminum-tin alloy or babbit,
are suitable for more than 150 kinds different of automobile at the
international market, covering to more than 30 international famous
brand engine types
2) With the annual 12 millions slices output and all sold to more than
30 countries and regions

Automotive Bearings
We can supply most of the automotive bearings such as clutch release bearings, water pump bearings, hub wheel bearings, alternator bearing, steering wheel bearing, tensioner & idler bearing.

Bearing Bushing
Our bearing bushing takes aluminum alloy, copper alloy, tin alloy as raw materials. Currently we manufacture circinal bearing bushing, hemi-circinal bearing bushing,thrust bush, shaft bush four series of products. Our products are mainly manufactured as per country standard GB/T1151-93, ZBT12002-87 with stable quality and reliable property. It is widely applied to automobile,

Water Pump Bearins, Wheel Hub Bearings, Compressor Bearings
our company mainly produces deep groove ball bearings, water pump bearings, one-way bearings, clutch release bearings, tensioner bearings, automotive air-conditioning compressor bearings, thrust ball and roller bearings, tapered roller bearings, wheel hub bearings, insert bearings, pillow blocks, oscillating rod end bearings, spherical plain bearings, cylindrical roller bearings as well as many other special non-standard ball bearings and mechanical parts with an annual output of over 20 million pieces, which are widely used in such markets as household appliances, automobiles, motorcycles, agricultural machinery, power tools,