| This page highlights pre-qualified Burners & Incinerators
(such as Gas Burner, Oil Burner, Industrial Burner, Heating Furnace,
Incinerators, etc.) manufacturers, exporters and suppliers in
China and around the world, which is broadcasted online by the
world Suppliers Directory. the sophisticated B2B directory covering
useful Burners & Incinerators Business information and Burners
& Incinerators trade services displayed to its full extent
by product description and manufacturer background introductions.
Taking advantage of the robust search engine of the world suppliers
directory, global Burners & Incinerators importers, agents
and distributors even Odm/Oem will easily find their opportunities
to establish business relationship with reliable Burners &
Incinerators manufacturers, suppliers and exporters.
Burners & Incinerators Products and Supplier, Manufacturer
Burners
We are supplying Elco-Klockner, Weishaupt Burner Spares. Landis
& Gyr burner controls, Dungs, Kromschroder gas train components.
We convert oil fired boilers to dual fuel (gas/oil) fired Boilers.
Fire Grate of Waste Incinerator
This product is adapted for garbage incinerating electric power
plant. It is cast by precise casting technology. High temperature
area of the product is made of high nickel steel and the low
temperature area is made of low nickel steel. Different furnace
bar can be made by the sketches and material provided by customers..
Gasifier
The Gasifier is a device which converts firewood into gas, which
can be burnt just like LPG. However unlike LPG, it cannot be
stored in cylinders for later use. The wood gas has to be used
as it is produced. Fire wood chips(3-4"size)have to be
charged in the gasifier before starting and burning gas can
be obtained within 10 minutes. One charge can last for nearly
5 hours. It requires no constant attention expect occational
shaking of the grate. A blower is required to pass air through
the gasifier to obtain gas.
Burner Nozzles
Those products can bu used in tunnel kiln, shuttle kiln, roller
hearth kiln and other industrial kiln of fuel gas, fuel oil.
They are widely used and adopted in domestic and foreign kiln
companies. They can can obviously control and adjust temperature
balance inside of the kiln with big width size.
Thermic Fluid Heaters Oil & Gas Burners
HIGH EFFICIENT THERMIC FLUID HEATERS FOR ALL TYPES OF FUELS
COAL, WOOD, LIGNITE, HUSK, AGRO WASTE ETC WITH OIL / GAS FIRED
WORLD CLASS IMPORTED RIELLO MOST EFFICIENT BURNERS AVAILABLE
FOR BOILER / THERMIC FLUID HEATERS/STENTER / PROCESS HOUSE CONVERSION
APPLICATIONS.
Tunnel Kiln For Sanitary
1 final product pcs sanitary firing once. 2 output pcs / day
1000 firing cycle 16 hrs. 3 length of kiln m 70 35 standard
sections. 4 inner width m 2. 2 / 2. 3. 5 useful height of loading
the product m 0. 9. 6 work day / yr day 330. 7 rate of firing
eligibility h 14-18 adjustable. 8 size of kiln car mm 1650x2160
lxw. 9 nos. Of cars in kiln car 65 42 cars inside the kiln.
10 load of the car pcs / car 16-20 mix. 11 firing temperature
1180-1230 as per the design of product. 12 firing atmosphere
oxidation. 14 fuel 0# light diesel 10000 kcal / kg. 15 burner
pcs 68. 16 temperature controlled unit unit 12 including one
fast cooling unit. 17 temperature difference of section 5 area
of thermo maintaining after firing. 18 consumption kcal / kg
1200. 19 kiln car pattern automatic.
Built-in Gas Stove
Stainless steel panel, non-stick. Rampant fire in high efficiency,
energy saving. Four-burner design for multiple purposes. Auto
cut-off protection device. Automatic electric pulse ignition.
Annealed copper burner cap.
Control Regulator
Control Regulator for Main Burner and Pilot Load Applications.
Poppet model RV Series is designed primarily for main burner
and pilot load applications. Available from 1/8 to 3/4-inch
pipe size and rated for up to 1/2psi (35m bar). Gases: natural,
manufactured, mixed, liquified petroleum or LP gas-air mixture.
Heavy Oil Burner
We supply heavy oil burners which can burn heavy oil or all
kinds of waste oil such as dreg oil, animal oil, even edible
oil. Can be used in supplying heat energy for industries, hotel
etc.
Single Burner Hot Plate
AC 230V/50Hz, 1,500W. Cast iron heating element. 7-step thermostatic
control. Automatic safety shut-off with thermal fuse. Big power
indication light. Durable stainless steel and white finishing
Gas Burner
1) Automatic heavy oil, Diesel Oil, Gas Full- proportion Burner.
2) Automatic burner of Multi-Fuel combination. 3) Sintering
Furnace, High & Low temperature Hot Blast stove. 4) annealing
furnace, Incinerator, Steam boiler. 5) Hydrogen-Oxygen fuel
Burner
Ceramic Crucible
1) Material: 99% Al2O3 (alumina). 2) Density: 3.8g/cm. 3) Hardness:
HRA 88. 4) Bending strength: >350MPa. 5) Compressive strength:
>3,900MPa. 6) Fracture toughness: 3.0-4.0MPam 1/2. 7) Thermal
conductivity: 30W/mk. 8) Young's modulus: 380GPa. 9) Maximum
using temperature: 1,800 deg.C. 10) Dimensions: O.D. 15-300mm,
height 15-300mm, thickness>3mm. 11) Available in various
types: round bottom, curve, square, cylindrical. 12) Designed
for high temperature fusion and incineration in an oven or furnace,
made from glazed ceramic material
Gas Regulators
WE offer Gas filters, gas pressure regulators, gas governors
in 1/2" to 2" versions with 10 to 200 mbar spring
configuration. Gas solenoid valve for gas burners in quantity
with very reasonable rates.
Industrial Burner
1) Intense in firing, steady in burning, safe, fast temperature-elevating,
low in noise. 2) Its fume escape conforms to international standards.
3) Suitable for heating units in petroleum and chemical industry.
4) The nozzles are made of quality high temperature resistant
material (309 310). 5) Adopts in-stage burning technology, fume
re-circulation technology and heavy-oil misting technology.
6) Misting 1 kg of heavy oil consumes 0.15kg steam. 7) Its noise
is below 85db9 (A), and content of carbon dioxide is below 50mg/Nm3
and content of NOX below 200mg/Nm3
Frit Kiln For 15 Square Metre Ceramic
1. kiln is of flame of horse foot style with a couple of regenerator
and air exchanging system of flashboard style. The two burners
are used alternately to protect the burners. The temperature
can be adjusted at any time, so do the length of the flame.
2, there are observation holes set around the kiln wall so as
to know the firing condition in time. 3, regenerator is the
equipment of grid style. 4, the high-quality material are selected
for the inner lining of the frit tank because it is near the
entrance. 5, the movable bricks are assembled at the entrance
to decrease the fluctuation of the liquid because of the corrosion.
6, feeding machine are controlled automatically by rated cycle.
7, construction of bypass gas channel- construction of main
gas channel- fabrication of regenerator main pole- fabrication
of small furnace frame- fabrication of tank steel frame- fabrication
of operation tank steel frame- fabrication of material supplying
channel steel frame- construction of regenerator, small furnace,
frit tank, operation tank
Furnace
We can offer Furnaces, Dryers, Ovens, Rotary Kilns, Material
Handling Equipments, Incinerators, Hydraulic and Pneumatic Systems
and relevant turnkey projects. Our Partial Product list is as
below: Aluminum Extrusion Plants ; Galvanizing Plants ; Magnesium
Melting and Casting Plants ; Lead Melting and Casting Plants
; Zinc Melting and Casting Plants ; Mineral Roasting Calcination
Plants ; Bentonite Processing Plants ; Lub-Oil Reclamation Unit
Organic Carrier Heating Furnace
Main products: 1) Coal fuel heating furnace ; 2) Oil fuel heating
furnace ; 3) Gas fuel heating furnace; 4) Waste wood fuel incinerator
; 5) Molten salt heating furnace. Features and specifications:
1) Economic design with high efficiency and low energy consumption
; 2) Structure does not damage heat carrier ; 3) Simple to check
and maintain ; 4) Equipped with safety device ; 5) Meets environmental
protection regulations ; 6) Model YY(Q)L vertical oil fuel (gas)
heating furnace ; 7) 150,000-12,500,000 calories/h ; 8) Maximum
temperature: 350°C
Gas Pressure Regulator
Gas Pressure Regulator for Industrial Gas Burners. Inlet Pmax:
6bar. Inlet caliber: 3/4 inches. Pressure grade:PN6. Working
temperature: -20°C ~+60°C. Outlet pressure: 5 to 50kPa. Outlet
caliber:11/4 inches. Flow range: 1-300Nm3/h. Weight: 1.5kg
Large trolley furnace
Mainly used in annealing and heating treatment of billets, steel
ingots and other materials, the temperature control system is
fully-automatically controlled.
Solder Tin Melter
1) Close type tin melting machine adopts Italian burner. 2)
With the advantage of quick heat transfer, high efficiency,
low cost, decrease environment pollution, this machine is a
good option for non-ferrous metal especially for tin melting.
Modern tin industrial manufacturer's requisite equipment. 3)
Quick melting speed, high yield, high efficiency, small occupation,
fewer operator provides advantage to a quick development of
the factory. 4) If deploy automatic whisk, the ingredient of
the melting tin will be even and the temperature will be stable,
which will enhance the quality accordingly. 5) Compared with
refining stove, it can reduce tin wastage by more than 3-5%
(per different tin raw material) and reduce processing cost
at the same time. 6) Adopts fuel heating not coal heating, which
can largely improve the working environment and work intensity
of the worker and decrease investment in environment protecting
equipment
Consecutive heating furnace
The consecutive heating furnace includes a feeding unit, furnace
body, steel slide channel, burning system, output material device,
temperature control system, furnace door opening and closing
system and fume exhaust device. The heat exchanger features
high heat efficiency, quick heating, low production cost, less
environmental pollution and a compact structure.
Incinerator
The furnace body has a rational structure, and the burning course
is closed for no leakage. The odor gas will decompose and be
sterilized completely without secondhand pollution. This incinerator
features an advanced design, compact dimensions, high heat efficiency,
complete burning capabilities, low operation cost, easy and
simple operation, and convenient installation and maintenance.
Our product quality leads the domestic incinerator industry.
Box type heat-treating furnace
This product is used for annealing, tempering or stress-elimination
treatment of colored metal and black metal; the furnace is also
used in processing and testing. This equipment can be used for
heating and cooling of glass and other products under 600°C.
Featured Burners & Incinerators In Industrial Supplies
Directory
Gas Burner, Oil Burner, Industrial Burner, Heating Furnace,
Incinerators Manufacturer, Supplier, Exporter, Company from
China and around the world. |
