FM-10 Foamed Concrete Machine
（foamed concrete machine for sand as a partial raw material）
The scope of application
1. Mainly used for roofing and flooring
2. Suitable for making products of the foamed concrete
3. Working Process
FM-10 mixes cement, fly ashes, sand, foam and water in a ratio in the mixer into foamed concrete, and then storage the foamed concrete in storage tank , after then use two suction of pump in the storage tank to high pressure pipe through pump. Last step, casting to moulds and construction by pump pipe. (See complete processing diagram):
Performance Characteristics
1. Include feeder machine，mixer and foam generator, high mechanization, easy to operate
2. Mixer blades are especially designed for the foamed concrete; efficient mixing with good quality
3. Large capacity of the mixing bucket , large capacity, fast loading.
4. Material loading, water refill, and foam through quantitative measurement or control. The performance of foamed concrete is satisfying.
5. After thoroughly stirring, damage to the foam bubble is minimized when transferring. As a result of this, the quality of construction is guarantee and more reliable.
Technical Parameters
unit parameters
Estimate volume m3 1.4
Effective volume m3 1.0
Storage Tank m3 1.5
Theoretical capacity m3 20
Mixing speed rmp 27.6
Raise speed of hopper m/min 19
Mixer power Kw 15
Brake winch power Kw 4.5
Water pump power Kw 0.75
Water pump flow m3/h 18
Water control Time Relay
Dimensions
（L*W*H） Working condition mm 3350×1900×3130
Running state mm 3350×1900×3060
weight kg 3000
Copyright Notice © 2008 Trade-suppliers.com Corporation and its licensors. All rights reserved.
Bossgoo Gosgoo Gosfurniture Goslighting Gosmould Gosmachinery Gosdoors Gosbearing
