HC705/HC05 Programmer MOTOROLA MC68HC705B16/32, MC68HC705X16/32, MC68HC05B6/8/16/32, MC68HC05X16/32 SMART EEPROM Programming Tool • On board EEPROM programming. • Communication with PC via a LPT port. • High - Speed programming • 52PLCC PGA socket on a board and additional adaptor for 64QFP device in complete Package includes:...

Gambit+htag2 Programmer Gambit+Hitag2 V3.1 Programmer is intended for RFID ( transponders ) programming.it is mainly produced for programming RFID transponders and generating RFID transponders from the immobilizer dump/eeprom of the car, in order to be able to start the vehicle. Gambit programmer works with PCF7935, PCF 7936 and T5...

HC908/HC08 Programmer Motorola MC68HC908AZ60, MC68HC05H12 Programmer Flash/EEPROM programmer with security passed • On board EEPROM/FLASH programming. • Communication with PC via a LPT port. • High - Speed EEPROM/FLASH programming • 64QFP ,100QFP and 52PLCC programming adapters Package includes: Main hardware (programmer...

Motorola MC68HC(7)11 EEPROM programming tool • In circuit / on board EEPROM programming. • Communication with PC via a serial port • CONFIG Register Programming • Pin tester in both operation modes Package includes: Main hardware (programmer board) MC68HC11EA9 PLCC-52 programming adapter MC68HC11E PLCC-52 programming...

ProgramTool-48PXP Processor Features For ProgramTool-48PXP Intelligent Universal Programmer USB or parallel port interface with auto-switch power Support 5V and 3.3V low voltage devices, 1.8V chip support through low voltage adapter. Less then 2 seconds per Mbit Programming speed for high density flash chip. No adapter required for DIL...

ProgramTool-848XP TurboGang Processor Features 8 independent fully isolated 48-pin ZIF sockets Support Flash, EPROM, EEPROM, Microprocessor with 5 Volts and 3 Volts Program 8 pieces 8 MB Flash chips within 45 seconds Auto-sense, self-start with standard/semi-concurrent mode Independent modules allow flexible configuration Universal...

Super-Program OBD-980U USB Interfaced Ultra-high Speed Universal Device Programmer Features: CE approved. Programs high-density Flash memory devices at near theoretical minimum programming times (Program+verify INTEL28F320W18, 32Mb less than 13.5s ) Standard 48 pin universal pin-drivers come with universal package adapters to support...

Super-Program OBD-3000U Features: CE and FCC approved. Programs high-density Flash memory devices at near theoretical minimum programming times (Program+verify INTEL28F320W18, 32Mb less than 13.5s ) Standard 48 pin universal pin-drivers come with universal package adapters to support all type of devices in same package with a single...

Super-Program OBD-9000U Advanced Stand-Alone Universal Gang Programmer Features: CE and FCC approved. Four independent programming modules in one unit. Even the algorithm engines are independent to each others. Besides the traditional synchronous mode. The asynchronous mode provides a more efficient way for production. Each module starts...

X-programmer The XPROG supports programming of Motorola 68HC05xx, 68HC08xx, 68HC11xx microcontrollers internal EEPROM and serial EEPROM's - most used programmable device in car radios, automotive computers (dashboards, AIRBAG, immobilizers), and industrial products. Serial port interface (up to 115K baud) works on (COM1, COM 2, COM3 or...